Export a console file from your plot
Download a show file for an X32, M32, WING or iLive, or channel names for a dLive, Avantis or Yamaha CL/QL, straight from your input list.
Checked against the editor on
Your input list and monitor mixes already describe the show, so the console does not have to be set up from a blank page. A console file takes them to the desk.
Steps
- Build your plot and check the Inputs tab is in the channel order you want on the desk. Add your monitor mixes in the Monitors tab.
- Press Export console file in the toolbar.
- If your channel numbers show FOH and MON for a split, choose which desk the file is for.
- Choose the file for your console:
- X32 / M32 scene (.scn): a full starting show with names, EQ, dynamics, DCAs, monitor sends and effects. You need to be signed in.
- Behringer WING snapshot (.snap): the same kind of starting show for a WING. First pick where the inputs come from: Keep desk patch, Stage box on A or Desk inputs. The last two also set each channel's gain and 48V.
- Allen & Heath iLive full show (.xml): the same kind of starting show for an iLive: up to 64 channels with gain and 48V, low cut, gate, compressor and EQ, your monitor mixes on the auxes with their sends, and the reverb and delay sends.
- dLive / Avantis channel CSV: channel names and 48V labels only, for Director.
- Yamaha CL/QL channel names (CSV): channel names only, as InName.csv. Put it in a folder of its own and use CSV File Import in CL/QL Editor.
- Load a WING snapshot from the Library in WING Edit or on the desk, and an X32 scene from the Scenes page or X32-Edit. For an iLive show, put the file in iLive Editor's user shows folder (Allen & Heath, iLive Editor, shows, user, in your Windows user folder), open Shows and recall it, then send it to the rig from iLive Editor as you normally would.
Good to know
- Each console keeps a different number of characters in a name: 16 on a WING, 12 on an X32, and 8 on a CL/QL and an iLive (the iLive strip shows 5). Short names like "Kick In" or "Lead Vox" read best everywhere.
- A WING snapshot leaves the desk's outputs, main bus and matrix as they are. It holds up to 40 channels and 12 monitor mixes, with the reverb and delay on two buses of their own.
- An iLive show starts from Allen & Heath's own FOH show with LR mains: 8 mono auxes and 2 stereo auxes for monitors, and the factory effects (the reverb goes to the Plate or the Hall 480, the delay to Delay Vocal). A wedge mix gets a mono aux and an in-ear mix a stereo one, and once both stereo auxes are taken an in-ear mix gets a mono aux. Channel N uses stage box socket N, so preamps are set for the first 48 channels. DCAs, mute groups and the compressor's release are left for the engineer.
- Your choice of WING inputs is remembered on this device.
- The file is a starting point. The engineer still sets the mix for the room.