What's new

Every change to Stageplot Pro, newest first. Most of them were asked for on the feature board. For step by step instructions, see help and tutorials.

Every help guide now has a video

New

The last ten help guides have their videos: areas, rows of chairs, exact sizes, layers and groups, the snap grid, label position, text fonts, resizing the editor panels, contacts and notes, and the 3D and cable pages of the PDF. Each one is about a minute long with captions, and plays at the top of its guide on the Help page.

That makes a video for every guide, plus the getting started video at the top of the Help page. They are all on our YouTube channel as well, @stageplotproapp.

The FOH or monitor desk choice is easier to spot

Improved

When your input list has FOH and MON channel numbers, Export console file asks which desk the file is for. That choice now sits in a coloured box at the top of the menu, blue for the FOH console and amber for the monitor console, under the question "Which desk is this file for?". A line under it says which channel numbers the file uses, and that every file still carries the FOH mix and all the monitor mixes.

Clearer console export menu

Improved

Each file in Export console file now says exactly what it sets. The X32, WING and iLive full show files list what they carry (names, colours, gain and 48V, low cut, gate, compressor, EQ, monitor mixes and effects). The dLive and Yamaha files say that they carry names only. The iLive names-only file is gone from the menu, because the iLive full show (.xml) carries the names and everything else.

Watch help guides being done in short videos

New

Help guides now open with a video of their steps being done in the editor, about a minute each, with captions. The first nine went up that day: cable paths, stage shapes, venue floor plans, the 3D view, console files, channel numbers, shared monitor mixes, the output list and linked input names. The written steps are still underneath, so you can watch first and then follow along at your own pace.

New to Stageplot Pro? The Help page starts with a getting started video that goes from a template to a finished stage plot, input list and PDF. A guide that has a video shows how long it is in the list.

The videos are also on our YouTube channel, @stageplotproapp.

Export a full Allen & Heath iLive show

New

Export console file now offers an Allen & Heath iLive show, a full starting show like the X32 and WING files. It sets up to 64 channels with names, colours, preamp gain and 48V, low cut, gate, compressor and EQ for each instrument, the fader, pan and mute, your monitor mixes on named auxes with each channel's sends, and reverb and delay sends that suit the band. A wedge mix gets a mono aux and an in-ear mix a stereo one.

Put the file in iLive Editor's user shows folder, open Shows and recall it. DCAs and mute groups are left for you to set.

How to use it: Export a console file from your plot

Export the cable plan and 3D view from a shared link, and see its output list

Improved

The shared plot page now has the same arrow beside Export PDF as the editor. Whoever opens your link can tick Include the 3D view page and Include the cable plan, and the PDF they download has those pages, built from your plot.

The lists beside a shared plot now sit in two tabs, Inputs and Outputs, each with its count, so the output list is one press away instead of hidden under a long input list.

Shape the stage and add thrusts, catwalks and round platforms

New

The palette has a new Stage shape & pieces section. Pick a shape for the stage itself: rectangle, rounded corners, round or oval, diamond or octagon. The width and depth in the toolbar still set its size.

Below the shapes are pieces that join the stage: a thrust, an angled thrust, a catwalk with a square or round end, a rounded front, a pointed front and a round platform for a B-stage. Click one to add it to the middle of the front, or drag it onto any edge and it snaps on. The stage and its pieces are drawn as one deck, with one outline and the grid carried across, and each piece shows its size. Type an exact width and depth in Properties under Size, and turn a piece to join the back or a side.

The 3D view builds the same deck: a round stage, a diamond or a stage with a thrust and a catwalk stands up in 3D exactly as it is drawn, and gear on a thrust or catwalk stands on it at the stage's height while gear beside it stays on the floor. Areas and cable paths follow the deck's edge, and the PDF's 3D views take in the whole deck. Shapes and pieces also print on the PDF plot page and show on the shared link.

How to use it: Shape the stage and add thrusts and catwalks

Start a new plot from the venue's floor plan

Improved

The window that opens with a new plot now has a third choice beside starting from scratch and using a template: Start from a venue floor plan. It opens the file picker straight away, and the plan lands on your new plot ready for its scale. If you are not signed in, it takes you to sign in and brings you back with the floor plan panel open.

How to use it: Build your plot on the venue's floor plan

Templates open centred on the stage

Fixed

Opening a template put every item about a foot and a quarter to the left of where it belongs, so gear at the left edge hung off the stage. Templates now open with everything in place inside the stage outline, and the 3D view shows them in the same spots.

Plots you have already saved are not moved.

Build your plot on the venue's floor plan, to scale

New

Click Floor plan at the top left of the stage to upload the venue's floor plan as a PDF, PNG or JPG. Set its scale by clicking two points you know the distance between, such as both ends of a wall, and typing that distance. For a PDF you can type the printed scale instead, such as 1:100 or 1/4" = 1'-0". Then click Fit stage to plan and drag your stage onto the venue's stage, pulling its sides and corners in or out until it fits exactly, or drag the plan itself, and turn it if it sits at an angle.

The plan sits faded under everything on the plot, so you can see exactly where the stage, FOH and the doors are. It prints behind the plot on the PDF (untick it behind the Export PDF arrow to leave it off), shows on your shared link, and lies on the floor around the stage in the 3D view.

CAD files (DWG, DXF) can't be opened in a browser, so save the plan as a PDF from your CAD program first. Floor plans are on the website for now and come to the desktop app in a later release.

How to use it: Build your plot on the venue's floor plan

Find Stageplot Pro on YouTube and Facebook

New

Stageplot Pro now has a YouTube channel with a video for each help guide, and a Facebook page where new videos and updates are posted. You'll find both at the bottom of every page on the website, on the Help page under the getting started video, and in the editor's help menu as Video tutorials on YouTube.

Classic Rock Cover Band template labels no longer overlap

Fixed

The Classic Rock Cover Band template now opens with every label readable. Each player's amp, mic and wedge sit in their own column with room for the caption, and the drummer sits inside the kit under the Drums label. The channels and monitor mixes the template creates are unchanged.

Read and reply to team comments on feature requests

New

Feature suggestions now show comments from the Stageplot Pro team under each request, so you can see what is planned and why. Open Feature suggestions in the editor to read them.

Signed in, you can reply under a team comment and delete your own replies. Replies show as Member to everyone else.

Four new templates for orchestras and horn bands

New

Four larger templates, each based on a layout a working production built in Stageplot Pro: Orchestra with Band & Soloists, Seated Concert Band, Film Score Orchestra and Horn Band with Percussion. Open them from the template picker like any other template. Names from the original plots have been removed, and every label is readable.

Items drawn at an angle in a template, such as a grand piano or a wedge, now keep their label under the drawing instead of turning with it.

Help and What's new pages

New

Every tutorial now has its own page under Help, and What's new lists each change to Stageplot Pro as it ships. Help sits in the menu at the top of the site, and both are linked from the help button in the editor's toolbar and from the foot of every page.

The homepage stage is the real 3D models on every device

Improved

The 3D stage on the homepage now uses the app's own 3D models on phones and tablets as well as on desktop. Until a model has loaded, each piece stays the flat drawing on the plot and the model then grows out of it, so the stage is never empty and never a picture standing in for a model. With data saver on, the stage stays a flat plot.

The lit stage behind the closing section had stopped drawing on desktop graphics cards and showed a plain dark background. It is back.

The models the homepage loads are now light copies made for it, about 1.9 MB to download where the editor's own files were 6.2 MB, so the stage fills in sooner on a phone. The editor and the live 3D stage still use the full models.

On a phone the opening headline no longer sits on top of the drum kit and amps, the closing headline breaks in the middle of each sentence, and the comparison table shows the current icon count.

Guides, blog and the other reading pages scroll the ordinary way

Improved

The smoothed mouse-wheel scrolling now belongs to the homepage only, where the page is built around it. Guides, the blog, icons, templates, pricing, comparisons and consoles scroll exactly as your browser and mouse are set up to, and a new page always opens at the top. If your system is set to reduce motion, the homepage scrolls the ordinary way too.

The menu at the top of those pages now marks the section you are in, and the links at the bottom are easier to hit on a phone.

On the homepage, the mixing console under "Your stage plot becomes the first mix" no longer tilts into place: it is readable as soon as it appears and the faders rise to their levels. The board is smaller, its labels are larger, and you switch between X32 / M32, WING, iLive, Yamaha and dLive / Avantis with the keys on the board itself, with what each one exports written beside it. The stage plot pictured further down is a sharper one, an eight-piece wedding band straight from the editor.

Template labels no longer overlap

Fixed

Thirty-nine stage plot templates now open with every label readable, including the trios, the DJ setups, the big band, the steel pan ensemble and the choir. Items that were stacked too tightly have been spaced out, and a few stages are a little larger to make room. Drummers now sit inside their kit, and the choir template's pianist at the keys, under the instrument's label.

The channels and monitor mixes each template creates are unchanged.

Small templates keep their gear together

Fixed

Templates now open exactly as they are drawn, instead of being stretched to fill the stage. Small acts no longer spread out across the deck: the solo pianist's vocal mic stands beside the bench instead of 10 feet away, the DJ's decks sit on the booth with a monitor either side, and the string quartet and acoustic duo stand close together again.

Gear at the edges of the duo, trio and quartet templates, and the drummers at the back of several band templates, no longer hang over the edge of the stage. The channels and monitor mixes each template creates are unchanged.

The stage keeps working after undo and redo

Fixed

After an undo or a redo you can drag a selection box across the stage again, and the grid, the stage size and the units stay as they are set now, instead of going back to how they were at the step you returned to.

Export a Behringer WING snapshot

New

Export console file now offers a Behringer WING snapshot, a full starting show like the X32 file. It sets up to 40 channels with names, colours, low cut, gate, compressor and EQ for each instrument, the DCAs and mute groups, your monitor mixes as named buses with each channel's sends, and a reverb and a delay that suit the band. A wedge mix gets a mono bus and an in-ear mix a stereo one.

Under the option, pick where the desk's inputs come from: keep the desk's own patch, a stage box on AES50 port A, or the console's own inputs. With either of the last two, each channel is patched and its preamp gain and 48V are set. Load the file in WING Edit or on the desk from the Library.

How to use it: Export a console file from your plot

The homepage shows today's editor, PDF and 3D view

Improved

The feature cards on the homepage have new screenshots of the input list, the monitor mixes, the icon palette and the PDF export, plus two new cards: cable paths on the plot, and the optional 3D view.

The printout under the hero now shows the PDF as it exports today: the stage plot, then the input list, output list, monitor mixes and contacts together on one technical sheet.

The homepage's 3D stage shows real models of the floor gear

Improved

In the homepage's "Turn your 2D plot into 3D" moment, the stage box, the DIs and the guitar pedalboards are now the same 3D models the editor's 3D view uses, instead of flat icons lying on the deck.

Two plots to explore in the homepage’s live 3D stage

Improved

Try the live 3D stage on the homepage now switches between two plots, a pop band and a real band's plot with percussion, and the second one can show its cable paths.

Export channel names for an Allen & Heath iLive

New

Export console file now offers Allen & Heath iLive channel names. It downloads a file of your input list's names in channel order, cut to the 5 characters iLive keeps, with a left or right side kept at the end. In iLive Editor, use Tools, then Import Channel Names. An empty channel keeps its number so the names after it stay on their channels.

How to use it: Export a console file from your plot

A renamed plot prints its new name

Fixed

The PDF banner and file name use the Band Name in the Branding tab, which a duplicated plot copied, so renaming the copy left the old name on every export. Renaming a plot now updates the band name too when it was just the plot's old name. A band name that says something else is left alone.

Exports and shared links carry a small Stageplot Pro credit

Improved

Every page of an exported PDF now has the Stageplot Pro mark and "Powered by stageplotpro.app" in the middle of its footer, and the link opens the site. The page number and the date it was made sit together on the right.

A shared plot's page shows a small "Powered by Stageplot Pro" pill in the bottom left corner of the plot. Nothing is drawn over the plot itself.

Nothing in the 3D view turns to face the camera

Improved

Items without a model used to be flat pictures that swung round to face you. Now cables, video plugs, rugs and floor items lie flat on the deck where they are drawn, uploaded pictures stand upright facing the audience, and the exit sign and fire extinguisher have models. The Drum Carpet Mat and Area Rug have a new muted grey rug picture.

How to use it: Get the most from the 3D view

Set an item’s height in the 3D view

New

The Size section of the Properties tab has a Height field beside Width and Depth for every item shown as a 3D model. It starts at the model's own height for its size. Type a height to make it taller or shorter in 3D only: the plot, the PDF plot page and the lists stay as they were. Auto height puts it back. A truss upright given a height carries its truss on top.

How to use it: Set an exact size for a riser or any item

Item names in the 3D view

New

Tick Show labels in the 3D view's controls to see each item's name from the plot on a small tag. Low gear such as wedges and DIs has its name lying on the deck in front of it, everything else has it just above. Labels never overlap and never hide behind gear, and from far away they give way to the models. An item whose label is hidden on the plot gets none in 3D. The choice is remembered on your device, and the PDF's 3D page follows it.

How to use it: Get the most from the 3D view

3D models for nearly every icon

Improved

Almost every icon now has its own model in the 3D view: single drum pieces, concert, world and hand percussion, cellos and upright basses, ukulele, mandolin, banjo, sitar and other strings, woodwinds and horns on stands, folk winds and bagpipes, Hammond and Leslie, keytar, dueling grands, singers and keys players, drum shields, church furniture, stage tech, the backdrop, stairs, risers and trusses.

Mixing consoles have readable faders, buttons and screens. Boom mics stand on tripods at their real height whatever the icon's size. Risers drop at their real size (8 by 4 ft and 8 by 8 ft), gear drawn on a riser stands on its deck, and stairs near an edge turn to climb onto it.

How to use it: Get the most from the 3D view

Mark areas on and around the stage

New

Add Area, under Add Text in the palette, places a named, coloured area you can move and resize, on the deck or off it: monitor world, backline, FOH, a quick change or a walkway. Areas print on the PDF plot page, show on the shared link and stay out of the input list, monitor mixes and output list. Fit to View takes in an area that reaches past the stage.

In the 3D view an area shows as on the plot, a light wash with its dashed outline and its name, on the deck or on the floor around it. It can be left out with Show in 3D view like any item.

How to use it: Mark areas on and around the stage

Cable paths on the plot and in 3D

New

Show cables in the toolbar draws a line from every input source to a stage box, and from a stage box to every wedge, tagged with channel numbers or the mix. Lines run at right angles, share a trunk, go round gear and keep off walkways and the front edge. With no stage box they meet at a Snake to FOH point. Patch to in the Properties tab picks the stage box, and a round handle on a line lets you bend it.

The arrow beside Show cables switches on power, speaker cable, DMX and video runs, each in its own colour: power from the nearest AC drop, speaker cable from an amp rack, DMX chained from a lighting desk, video from a laptop to the screens. While Show cables is on, the same lines lie on the 3D stage. The PDF can add a Cable plan page (tick it behind the Export PDF arrow).

How to use it: Show cable paths on the plot

Opening a deleted plot says so

Fixed

Opening a link to a plot that was deleted used to show a database error and a toolbar stuck on "Autosave retrying". The editor now says the plot is not in your account, with links to My Plots and a new plot.

FOH and MON channels, and stereo pairs on odd channels

New

The Channels button on the Inputs tab has two settings. Monitor desk or IEM split replaces the Ch column with FOH and MON, both numbered for you and both editable. Start stereo pairs on odd channels leaves a spare channel in front of a left and right pair when needed, so the console can link it (most desks only link 1-2, 3-4, 5-6).

Two rows ending in L and R with the same name become a pair wherever they came from, including rows you add by hand. When pairs on an existing plot sit on channels a console cannot link, exporting a console file explains it and offers Fix it and export. With the split on, the export asks whether the file is for front of house or monitors.

How to use it: Number channels for a monitor desk and keep stereo pairs linkable

Reset a forgotten password

New

Sign in has a Forgot password? link that emails a reset link. A wrong password now says so in plain words and offers a reset or a new account.

A list of every keyboard shortcut

New

Press ? in the editor, or open the help button in the toolbar and choose Keyboard shortcuts, to see every shortcut and mouse gesture on one page.

Edit the lists in a large window, from the keyboard

New

The button beside Add input opens the input and output lists in a large window with a tab for each. Text cells now take the keyboard: Tab reaches a cell, Enter or F2 opens it, Enter saves and opens the same column on the next row, and Escape puts the value back.

The buttons at the top of the Inputs tab are now labelled: Channels, Link names and Add input. Outputs has Add output, and Put back when outputs were taken off.

How to use it: Check and edit the output list

New icons: boom mics, TVs on stands, lighting and rigging

New

Mics has six side view boom mics (Boom Mic, Wrls Boom Mic and Short Boom Mic, each facing left or right). Video has TV on Cart and TV on Tripod. A new Lighting & Rigging section has a moving head, LED PAR, T-bar PARs, followspot, hazer, box truss, truss totem, chain hoist, truss upright and a Lighting Desk, and PA has an Amp Rack. Every one has a 3D model: a truss resting on uprights or carrying a hoist sits 10 ft up, and a chain hoist hangs above the stage.

The Turntable Rig picture lost a stray frame around it.

An output list built for you

New

The new Outputs tab lists every console output the show needs: each monitor mix, the PA, subs and other feeds, numbered for you with stereo outputs starting on odd numbers. Every field can be changed, outputs can be taken off and put back, and the list prints in the PDF, shows on the shared link and is kept in desktop project files.

How to use it: Check and edit the output list

The PDF puts every list on one Technical info page

Improved

The input list, output list, monitor mixes and contacts now share one portrait page, printed as small as needed to fit, down to 7 pt. A show too big for one page runs on over more pages at a readable size. Notes join the page when they fit, otherwise they get their own page after it.

The 3D page shows the stage from four sides, front, back, stage left and stage right, two by two.

How to use it: Add contacts and notes to the PDF

The toolbar fits smaller windows

Fixed

The editor toolbar fits a window from 1280 px wide without cutting off Sign Out. On narrower windows the plot name shortens, and Account and Sign Out show only their icons.

An LED wall typed 32 ft wide now has a 32 ft screen in 3D, centred in its truss.

Real 3D models for most of the gear

Improved

Many icons that used to appear in the 3D view as flat cut-outs now have proper 3D models: keyboards, electric and bass guitars, acoustic guitars, pedalboards, the guitar stand, laptop and overhead mics, every person, DI and AC power boxes, the orchestra percussion section, chairs and stools, subwoofers and PA tops, the mixing console, outboard rack, stage boxes, keyboard amp, congas, saxophones on stands, all nine DJ icons and the remaining PA speakers, including line arrays and columns. Latin percussion, sample pads, drum modules and thrones, stage boxes, tables, road cases and the upright piano followed, and the brass instruments got a slight brass tint.

The 3D view matches the plot more closely

Improved

Items in the 3D view now stand exactly where they are drawn on the plot; before, everything sat a little to one side and some items could end up off the stage. Amps are the size of their drawing, and the deck lines in 3D are 8 by 4 ft, the same as the 2D grid.

Gear in 3D is as wide as you draw it

Improved

Each model in the 3D view is now as wide and as deep as its item on the plot, at its real height. A width and depth typed in the Size section show on every model, with no limit, so a 12 ft riser or a 3 m screen looks the size you asked for.

How to use it: Set an exact size for a riser or any item

Undo, redo, delete and cut are saved straight away

Fixed

Undoing, redoing, deleting or cutting an item now counts as a change for autosave on its own. Before, those changes were only saved once you made some other edit, so closing the tab straight after a delete could bring the item back.

Contacts, notes and a readable contact line on the PDF

New

The Branding tab has three new sections. Contacts holds a list of people with name, role, phone and email. Notes has Technical Notes and General Notes. Both print in the PDF: contacts on the Technical info page, and notes there too when they fit, otherwise on their own page. People who open the shared link do not see them.

"Contact Text in PDF" sets the size and colour of the contact line in the banner, which used to be hard to read in soft grey on the accent colour. A hint suggests a clearer colour when needed.

How to use it: Add contacts and notes to the PDF

Type an exact width and depth for any item

New

Select an item and open the Properties tab: the new Size section has Width and Depth fields in feet or metres, following the ft/m switch. A riser typed as 8 by 4 ft covers exactly one 8 by 4 ft square of the deck grid, and the numbers stay the same when you rotate it. You can type 8, 8.5, 2.44 m, 96 in or 7'6".

Keep proportions is on for ordinary gear and off for risers, screens, rugs and other rectangles. Actual size puts a stretched item back to its real size, and a riser whose label says a size (such as "Drum Riser 8x4") offers a button to use it.

How to use it: Set an exact size for a riser or any item

Group items so they move together

New

Select two or more items (shift-click, or drag a box around them) and press Group on the small bar that appears under them, or press Ctrl+G (Cmd+G on a Mac). A click on any member then picks up the whole group, and moving, rotating, copying or deleting acts on all of it.

Double-click one member to move or rename just that item. Ungroup is on the same bar, or Ctrl+Shift+G.

How to use it: Arrange overlapping items and move them as a group

Leave chosen items out of the 3D view

New

Select an item, open Properties and untick "Show in 3D view". The item stays on the plot, in the input list and in the PDF plot page, but is not drawn in 3D. With several items selected one tick box covers them all, so Ctrl+A and one click brings everything back.

How to use it: Get the most from the 3D view

Choose which side of an icon its label sits on

New

Under "Show label on plot" in Properties, Label position offers Standard, Below, Above, Left and Right. Standard is how labels always worked: under the icon, turning with it. The other four keep the label on that side of the icon as you see it, level and clear of the picture, however the icon is turned or resized. It is the fix for labels lying across a turned amp. The PDF and the shared link follow it.

How to use it: Keep labels clear of turned icons

Bring items to the front or send them to the back

New

When two items overlap you can choose which one is on top. Use the Layer order buttons in the Properties tab, right-click the item on the stage, or press Ctrl+] and Ctrl+[ (Cmd on a Mac), adding Shift to go all the way to the front or back.

Carpets and drum mats now always drop behind everything else.

How to use it: Arrange overlapping items and move them as a group

Keep input names and stage labels the same

New

The Link names button at the top of the Inputs tab links each input's Source to the label of its item on the stage. With it on, typing a Source renames the item, and renaming the item changes the Source. One undo takes both back. A blue bar marks rows whose names match, and a dashed amber bar marks rows that still differ.

It is off until you switch it on, it renames nothing by itself, and it applies to items with one input. Drum kits, double keys, stage boxes and rows added by hand work as before.

How to use it: Keep input names and stage labels in step

Change a row of seats live, without it jumping

Improved

"Edit row" now opens a small panel beside the stage instead of a window, and every change shows on the stage as you make it: curve, spacing, number of seats, facing, arrangement, label and label position. The row keeps its place and tilt, and the seats keep their names, input channels and monitor links. Extra seats are added at the end.

Row labels now sit just clear of the seats, above or below the row. Done is one undo step, and Cancel or Escape puts the row back exactly as it was.

How to use it: Build and adjust a row of seats

Plots open even when one of their pictures is gone

Fixed

If a plot uses a custom icon that was deleted, or a picture that can no longer be loaded, the plot now opens anyway. The item keeps its place, label and channel, and the editor shows a notice saying which pictures are missing. The shared link page behaves the same way.

Choose whether the PDF includes the 3D page

New

The small arrow on the right of the Export PDF button opens the PDF settings, starting with "Include the 3D view page". It is on by default and remembered on your device. When it is on, page 2 is a fresh picture of the stage in 3D as it is at that moment, even if you never opened the 3D view. When it is off, the PDF is a page shorter and exports faster.

If the 3D picture cannot be made, the PDF still exports without it and a short notice says so.

How to use it: Choose what the PDF includes

Four more people: lead and backing singer, standing and seated keys

New

The People section has four new figures: a lead singer, a backing singer, a standing keyboard player and a seated keyboard player. Like every person they add no inputs or monitor mixes, and they drop at the same size as the other players.

Items shown as pictures in the 3D view also stopped changing size with the 2D zoom and with high resolution screens.

The Properties tab scrolls when it is full

Fixed

On shorter screens the lower sections of the Properties tab were cut off. The tab now scrolls, so every section can be reached.

Drag a side panel wider or narrower

New

The icon palette on the left and the Inputs, Properties, Branding and Monitors panel on the right can be resized by dragging their inner edge. A wider palette shows more icons per row, and a wider side panel gives the input list and monitor table room for long names. Double-click the edge to go back to the normal width.

Your widths are remembered in this browser. The panels never cover the whole stage.

How to use it: Make the side panels wider

Items stay on their mark when the window is resized

Fixed

Resizing the browser window shortly before a save could store some items in the wrong place, so they were shifted when the plot was opened again. Every item now keeps its position.

Put several wedges on one monitor mix

New

In the Monitors tab, the link button at the end of a mix's row offers "Same mix as". Pick another mix and both wedges share it: they show the same "Mix N" on the stage, share one column in the send matrix, and print as one row ("Wedge x2") in the PDF. The split button under a shared mix gives a wedge its own mix again.

Mixes can also be reordered with the keyboard now: Tab to a row's grip and press the up or down arrow.

How to use it: Put two wedges on the same monitor mix

Snap to grid and a stage centre line

New

The Grid and guides button in the toolbar opens three choices: Show grid, Show centre line and Snap to grid. The centre line runs down the middle of the stage with a small CL mark at the front edge.

With Snap to grid on, an item, a selection or a row lands on the nearest half foot as you drag it, and the centre line pulls a little harder, with a guide while you hold an item on it. Hold Alt (Option on a Mac) to place freely. Rotating and resizing are not snapped. All three choices are remembered on your device and never change the plot.

How to use it: Line gear up with the snap grid and centre line

Talkback mic and Hotshot icons

New

The Mics section of the palette has a Talkback Mic and a Hotshot footswitch. Each adds one input with a note that keeps it out of the main mix, and neither asks for phantom power. Search finds them as "talk back" and "hot shot" too.

In the X32 scene file a talkback channel now starts muted with its fader down and no effects, while its monitor sends still reach every mix.

A choice of fonts for text boxes

New

Text boxes have a Font menu at the top of the Text Style section in Properties: Standard, Condensed, Heading, Monospace, Handwritten and Stencil. Each is shown in its own typeface, and the same font appears on the shared page and in the PDF. Existing text stays in Standard.

How to use it: Change the font of a text box

A new homepage that builds a plot as you scroll

New

The homepage was rebuilt around a stage that assembles itself as you scroll: the plot is drawn flat, patched and mixed, and only at the end turns into the 3D view. The section after it shows the PDF the editor exports, page by page, made from the same plot.

It also runs smoothly on phones now, where the stage no longer flashes while the page scrolls.