Set an exact size for a riser or any item

Type a width and depth in feet or metres so a riser, screen or rug covers exactly the space it takes on the real stage.

Checked against the editor on

Watch it done (1:01, with captions). Watch on YouTube

Dragging a corner handle is fine for most gear, but a drum riser that has to be 8 by 4 ft should be 8 by 4 ft on the plot too. The Size section lets you type it.

Steps

  1. Drop the item on the stage and click it to select it.
  2. Open the Properties tab on the right and find the Size section.
  3. Type the Width and press Tab, then type the Depth and press Enter.
  4. To check it, open Grid and guides in the toolbar and tick Show grid. Each square of the grid is 8 by 4 ft, so an 8 by 4 ft riser fills one square.

Good to know

  • The fields use the plot's unit. Switch between feet and metres with the ft/m button in the toolbar. You can also type a unit yourself: 2.44 m, 96 in, 250 cm or 7'6".
  • The size is the space the drawing covers, without its label. It stays the same when you rotate the item.
  • Keep proportions is ticked for ordinary gear, so changing one number changes both. It is unticked for risers, LED walls, screens, rugs and mats, which can be any rectangle.
  • Actual size puts a stretched item back to the size it has when you first drop it.
  • If a riser's label already says a size, for example "Drum Riser 8x4", a button offers to use that size.
  • Items shown as a 3D model also have a Height field. It changes only the 3D view: see the 3D view tutorial.
  • A typed width and depth show on the item's 3D model too.
  • Escape gives up a number you are typing. Undo takes back a size you applied.