Truss Upright stage plot icon, Lighting & Rigging gear in the Stageplot Pro library
Truss Upright stage plot icon. This public preview carries a watermark; the version inside the editor does not.

Lighting & Rigging

Truss Upright Stage Plot Icon

The Truss Upright icon covers the physical side of a stage plot. It marks where a light or a piece of rigging stands and what it needs around it, which is easy to overlook and expensive to get wrong on show day.

Place it, rotate it, and give it a label that matches the language your crew already uses. The export keeps all of it.

Category
Lighting & Rigging (10 icons)
Input list
No input list rows
Mic or DI default
Not an audio source
Plan
Included free

Using the Truss Upright icon on a stage plot

Where it goes on stage

Stage position is the thing that gets argued about at load in, so it is worth drawing accurately. Totems and T-bar stands go at the upstage corners or in the wings, clear of the walking routes. Floor fixtures sit along the upstage edge or behind the backline, a followspot needs a raised position with a clear view of the stage, and truss is drawn where it will be flown or ground supported. If the room forces a compromise, move the icon and export again. A fresh PDF is cheap; an argument at load in is not.

What the crew needs to know

One thing worth writing down. Say who supplies each fixture and what power it needs. Haze and fog need the venue's approval, and anything that hangs from a chain hoist needs a rigging plan and a rated point.

On the input list

Truss Upright is not an audio source, so it adds no rows to the input list. It is there to make the drawing accurate: it marks where a light or a piece of rigging stands and what it needs around it, and the channel count stays clean because nothing silent is padding it out.

Console exports

Channel names travel with the plot. Export a scene file for an X32, M32, or Wing, or a channel name CSV for dLive, Avantis, SQ, DiGiCo, and Yamaha CL and QL. See the console guides.

More Lighting & Rigging

10 icons share the Lighting & Rigging section of the palette. These are the ones most often placed alongside Truss Upright.

View all Lighting & Rigging icons

Gear that usually shares the plot

Marks where a light or a piece of rigging stands and what it needs around it is only part of the picture. These icons come from Cases, Stairs, Risers, Trusses, Video and Safety, the sections that most often appear on the same drawing.